Ametek 5800 - Special Warnings and Information; Dryer Warning

Contents | ix
SPECIAL WARNINGS AND INFORMATION
EQUIPMENT USED IN CLASS I, DIVISION 2 HAZARDOUS LOCATIONS
Explosion Hazard - Substitution of Components May Impair Suitability for Class I, Division 2.
Risque d’explosion - La substitution de composants peut rendre ce materiel inaccept-
able pour les emplacements de Classe I, Division 2.
Refer to the “Safety Critical Components” in the Spare Parts list in
section 7 of this manual.
Explosion Hazard - Do Not Disconnect Equipment Unless Power Has Been Switched Off or
the Area is Known to be Non-Hazardous.
Risque d’explosion - Avant de déconnecter l’équipement, coupez le courant où vous as-
surez que l’emplacement est designé non dangereux.
All input and output wiring must be in accordance with Class I, Division 2 wiring methods (NEC
Sec 501.4(b) or CEC 18-152) (UL1604/CSA#213) and in accordance with the authority having
jurisdiction.
Dryer Warning
When removing and installing dryers, please follow all handling guidelines provided in the
MSDS (located in the back of the manual). When shipping the analyzer with the dryers in-
stalled, consult the MSDS for appropriate shipping information and instructions.
!
WARNING
!
WARNING
!
AverƟ ssement
!
WARNING
!
AverƟ ssement