Ametek Crystal Pressure nVision - Summary Screen

Chassis  12
nVision Operation Manual
Chassis Summary
•
Serial Number
•
Firmware Version
•
CPLD Version
•
Date/Time
•
Automatic Shuto
•
Backlight Shuto
•
Logging Interval
•
Message Store
•
Installed Modules
Module
•
Model
•
Serial Number
•
Firmware Version
•
Calibration Date
•
Calibration Due
•
Message Store
•
Userspan
•
Available Units
Module Specic Information
•
Temp. Coecients (RTD100)
•
Base Resistance (RTD100)
•
Lead Type (RTD100)
•
Zero Limit (PM)
Summary Screen
The Summary screen allows you to view details or settings in your chassis or module.

View a Module Summary
Once you have selected a summary screen, you may also use the () and () arrows to move to the next summary screen.
Press the
(Setup) button again to exit the summary screen.
Note: If a BARO module is installed, BARO Module will appear in the Summary drop-down menu list below Lower Module.

Summary Contents
The specic information in the Summary screens are: