Recording
Start a Recording
Press the (record) button until the red LED indicator ashes.
View the current Run Tag during a recording
Erase All Runs
A conrmation screen will ask, Are You Sure?. Press (select) to continue and erase all the data runs on this nVision. Press the (back) button to cancel.
!
CAUTION: Never remove power (either battery or USB) during the erasing process.
SERIAL NUMBERS
All serial numbers can be viewed using the nVision Summary screens or in CrystalControl.
Each product has a maximum of four serial numbers, one for the chassis and one for each of the modules (upper, lower, and BARO). Chassis serial numbers are
located in the power bay. Module serial numbers are located on the module and can also be viewed in the power bay of the Reference Recorder. Serial Num-
bers consist of 6 numbers, with the left most digit representing the year of manufacture. For example: 937834 was manufactured during 2009.
To Next Page
Loading...
Need help?
General
