Ametek Sorensen XG 300-5.6 User Manual

PROGRAMMABLE POWER
M370430-01 Rev F www.programmablepower.com
XG Family Programmable DC
Power Supply
Operating Manual
(firmware v 2.0 and higher)
670 Watts – 1700 Watts
Half Rack
Full Rack
6 V to 600 V Models:
6-110
6-220
6-220
8-100
8-187.5
8-200
12-70
12.5-120
12-140
20-42
20-76
20-84
33-25
30-50
33-50
40-21
40-38
40-42
60-14
60-25
60-28
80-10.5
80-19
80-21
100-8.5
100-15
100-17
150-5.6
150-10
150-11.2
300-2.8
300-5
300-5.6
600-1.4
600-2.6
600-2.8

Ametek Sorensen XG 300-5.6 Specifications

General

Brand	Ametek
Model	Sorensen XG 300-5.6
Category	Power Supply
Language	English

Summary

WARRANTY TERMS

PRODUCT RETURN PROCEDURE

Details the procedure for returning a defective product for warranty service.

Important Safety Instructions

WARNING: High energy and high voltage

Cautionary advice regarding high energy and voltage hazards when using the power supply.

CAUTION: For use as a battery charger

Specific caution for using the power supply in battery charging applications.

Installation

Basic Setup Procedure

Outlines the steps for installing the power supply, including inspection and connection.

Step 3: Connecting AC Input Power

Details how to connect the AC input power to the XG 850 Watt and 1500/1700 Watt models.

Step 4: Selecting Load Wires

Provides recommendations for selecting appropriate wire sizes for load connections.

Local Operation

Configuring Settings from the Front Panel

Explains how to configure the power supply settings using the front panel controls.

Alarms and Errors

Details the various alarms and error conditions that can occur and how to manage them.

Remote Operation

Hardware and Connection Setup

Information on setting up hardware connections for various remote interfaces (RS-232, RS-485, USB, GPIB).

Configuring Remote Control Using RS-232

Status Reporting in SCPI

Communications Options

SETTING UP LAN/ETHERNET

Details setup and configuration for LAN/Ethernet communication with MEB option.

Setting a Static IP Address through Ethernet, USB, Serial Interfaces

Calibration and Troubleshooting

Calibrating the Output Voltage

Troubleshooting for Operators

Provides common symptoms and checks for operator-level troubleshooting.