TR-2100 User Manual 11
2 Hardware Description
The size of the rack mounting enclosure depends on the number of input boards fitted.
Figure 1 Front view of TR2100 with 4 analogue input boards and 2 digital-only
input Boards.
Figure 2 Side view of TR2100 with 4 analogue input boards and 2 digital-only
input Boards.
The front panel of the chassis may be released by unscrewing the two screws at the top of
the panel. When the panel is opened the internal architecture of the TR-2100 may be seen.
The system is based on a number of horizontal steel trays that slide into tracks in two high-
density polyethylene side plates, making service and maintenance of the TR-2100 very easy.
The trays are locked in place with brackets that are screwed to the side plates.
To Next Page
Loading...