TR-2100 User Manual 64
Recording (Transient)
Recording resolution 16 bits (65536 levels)
Dynamic range 96.3 dB
Recording accuracy +/- 1 LSB
Sample rate Up to 19,200 per sec. at 50 Hz
Up to 23,040 per sec. at 60 Hz
COMTRADE rates supported
Analogues and digitals can have different rates
Pre-fault time 2 - 500 cycles
Post-fault time Fault length will extend as long as a trigger condition
exists
Minimum is 8 - 100 cycles
Safety window Recording time after trigger: 4 - 16 cycles
Maximum record length 1 - 30 sec. (This prevents memory filling with a
continuous trigger)
Synchronization All analogue channels sampled together and time
tagged to better than +/- 100 ns (if GPS option is used)
Programmable Features Sample rates
Pre, max & min post fault times
Safety window
Maximum record length
Trigger level and polarity
Trigger enable
Time and date
Channel labels
Local time offset
Configuration Switches Number of analogue channels
Number of digital channels
System frequency (50/60)
Printer connected
Modem connected
Network connected
Cross trigger enabled
To Next Page
Loading...