AMI 210BX - Table of Contents

MODEL 210BX Overview ___________________________________________________ 2
Method of Measurement _______________________________________________________ 3
Key Innovations_______________________________________________________________4
Safety, Warnings & Cautions ___________________________________________________ 5
Analyzer Installation___________________________________________________________8
Part I: Mounting the Analyzer____________________________________________ 8
Part II: Electrical Connections for the Analyzer ________________________________ 9
Initiation of the Pressure Sensor______________________________________15
Part III: Gas Connections_________________________________________________16
Initiation of Sample Flow __________________________________________19
Sensor Installation / Replacement _______________________________________________20
Calibration ________________________________________________________________ 22
Analyzer Operation _________________________________________________________ 26
COMMAND CENTER Interface Software Set-up____________________________________ 29
Remove the Explosion-proof Cover_________________________________________29
Establish a Communication Link ______________________________________ 29
Analyzer Output Setup _______________________________________________ 31
Alarm Setup ________________________________________________________ 34
Controls Both Alarms Setup ______________________________________________36
Datalog Column Setup _______________________________________________ 37
Download Data _______________________________________________________38
Modbus RS485 Communication Protocol ________________________________________ 41
Troubleshooting, Maintenance & Repairs___________________________________________ 45
Specifications _______________________________________________________________49
AMI
®
Warranty & Support___________________________________________________50
Limited Warranty/Disclaimer _____________________________________________ 50
Limitation of Liability___________________________________________________ 50
Limitation of Remedies _________________________________________________ 50
TABLE OF CONTENTS
Special Message from Advanced Micro Instruments (AMI):
Thank you for purchasing this MODEL 210BX for your Percent Oxygen measurement needs.
This permanent mount Percent Oxygen Analyzer is the industry's most advanced and
contains patented designs and innovations. You will find that it delivers the highest levels of
performance and reliability with a full suite of standard features.
Note: Read this manual carefully prior to installation.
If you have any questions, contact AMI at 714.848.5533 or www.amio2.com.
OPERATOR MANUAL
MODEL 210B
1