Amiga 1000 - Page 17

AMIGA 1000 ASSEMBLY
LEVEL
REPAIR
1.10.16
Load
MANDRIL from the PICTURES window.
Position the pointer on the
MANDRIL
balloon and double-click the
left mouse button.
Verify
that:
MANDRIL display is complete
Colors
do
not bleed
The
CLOSE GADGET for
MANDRIL
is not operational in
Version 1.0. Therefore*
it is
necessary to RESET the system with the AMIGA/CTRL keys
if additional testing is desired.
•
If INCORRECT, refer to
1
.9 PCS CHECK. Problem may be the CUSTOM
CHIPS on the main
board.
OR
EXCHANGE the 1050 RAM EXPANSION
CARTRIDGE and RETRY.
•
If CORRECT, the
main
PCB and
RAM EXPANSION CARTRIDGE should be considered
GOOD.
1-15