5.1 Loading and transportation
After loading, the machine has to be attached in place (1).
Use the centre-of-gravity suspension point (2) in order to lift the
machine.
5. Transport
42
Danger
Only use sufficiently strong and secure loading
ramps when loading.
Check the contact points (frame, lifting rings) be
-
fore use for damage and wear. Immediately re
-
place damaged parts.
Secure the machine against rolling or slipping off
and against tipping over.
Ensure that no persons will be endangered.
When loading, lashing down and lifting the ma
-
chine always use the provided lifting points.
Persons are in danger, if they
•
go near swinging loads or
•
stand under swinging loads
After loading lock the tow bar.
B6799002
2
To Next Page
Loading...
