AMOT G Series - Introduction; Scope

5
Introduction
OMMGGE00217 Rev 4 – MAY 2019
Section 1
Introduction
Contents
Para Page
1.1 Scope ........................................................................................ 5
1.2 Safety ........................................................................................ 6
1.3 Maintenance ............................................................................... 6
1.4 Product Support .......................................................................... 6
1.5 Typographical Conventions ........................................................... 6
1.6 European Union Directives ............................................................ 7
1.6.1 EU Machinery Directive ...................................................... 7
1.6.2 Low Voltage Directive ........................................................ 7
1.6.3 EMC Directive ................................................................... 7
1.6.4 EU Pressure Equipment Directive ........................................ 7
1.1 Scope
This Manual details the installation, operation and maintenance of the AMOT
electrically actuated G Valve system.
Each item of equipment is described in a separate section as follows:
Actuator
Section 4
Valve Body Section 3
PID Controller
Section 5
&
OMM807100043
Temperature Sensor Section 6