AMOT G Series - System Overview; Description; Features

9
System Overview
OMMGGE00217 Rev 4 – MAY 2019
Section 2
System Overview
Contents
Para Page
2.1 Description ................................................................................. 9
2.1.1 Features .......................................................................... 9
2.1.2 Typical Applications ......................................................... 10
2.2 Identification of Model Number .................................................... 11
2.3 Modes of Operation .................................................................... 12
2.4 System Components .................................................................. 12
2.1 Description
The G Valve and its ancillary equipment are designed for the control of fluid
temperature by ‘diverting’ or ‘mixing’ control techniques.
The valves can be used for fresh water, most lubricating oils and other liquids.
The compact construction of the G Valve enables unobstructed, full-bore flow,
thus minimising pressure losses.
2.1.1 Features
The G Valve system has the following main features:
• Any direction of rotation.
• Any rotor-port configuration (most models).
• Compact construction.
• Low pressure drop.
• High accuracy (± 1° C or better).
• Mountable in any position.
• Manual override.
• Fluid temperature up to 100° C (212° F).
• Local valve position indication.