AmScope 150 Series - Maintenance;Precautions

10
150 Series
Operation
Maintenance/Precautions
- All glass surfaces must be kept clean. Fine dust on the optical surface should be blown o using a can of com-
pressed air or gently wiped o with a so lens paper tissue/nonabraisive lint free cloth.
- Carefully wipe o oil or ngerprints on the lens surfaces using tissue moistened with a small amount of lens
cleaner (we recommend Sparkle brand optical cleaner).
- Do not use Sparkle to clean other elements of the microscope. Use a neutral detergent on any plastic or painted
surfaces.
- Do not assemble or disassemble the microscope’s electrical components yourself without advisement from one of
our technicians. Doing so will void your warranty unless by advisement of one of our technicians to do so.
- Aer use, cover the microscope with the provided dust cover.
- Keep your AmScope microscope in a dry, clean location in order to prevent rust or other damage.
- To change batteries with this unit, use the included allen wrench (hexagonal shaped L-tool) to undo the door hex
screw on the base. Use 3 AAA batteries with the unit.
- e unit can be used as a recharger for AAA batteries specied as rechargeable only. Please do not use standard
batteries in the unit with the charger plugged in to avoid damage.