Although the printer interface is envisaged for use with low cost dot matrix printers, it will support
daisywheel printers with a suitable interface, and also graphics plotters, and multi colour ink jet
printers. The key to compatibility is the standard parallel interface.
Amstrad DMP-1
The Amstrad DMP-1 printer is a low cost printer, supplied complete with the necessary cable to
connect directly to the printer port on the CPC464.
* 50 CPS print speed
* Plain paper operation
* Cable and ribbon supplied
* Dot graphics
* Tractor fed paper
The DMP-1 is an impact dot-matrix printer using plain paper, with a maximum print speed of 50
characters per second. The customised software in the DMP-1 includes dot graphics ability, with the
capability to print complete screen ‘dumps’.
The low cost, versatility and features specifically customised for the CPC464 make the DMP-1 an
ideal printer for all ‘hard copy’ requirements.
For further details, contact AMSOFT at:
Brentwood House, 169 Kings Road, Brentwood, Essex CM14 4EF,
telephone 0277-230222
To Next Page
Loading...
