AMSTRAD CPC464 - Mode; Move; Mover

MODE
MODE <integer expression>
MODE 1
COMMAND: To change the screen mode (0,1 or 2), and clear the screen to INK 0, which may not be
the current PAPER INK. All text and graphics WINDOWS are reset to the whole screen, and the
text and graphics cursors homed to their respective origins.
Associatedkeywords: WINDOW, ORIGIN
MOVE
MOVE <x coord>,<y coord>
MOVE 34,34
COMMAND: To move the graphics cursor to a position specified by the absolute co-ordinates. YPOS
and XPOS are the corresponding functions to establish the current graphics cursor position.
Associated keywords: MOVER, PLOT, PLOTR, DRAW, DRAWR, ORIGIN,
TEST,TESTR,XPOS,YPOS
MOVER
MOVER <x offset>,<y offset>
MOVER 34,34
COMMAND: To move the graphics cursor to a position relative to the current co-ordinates. YPOS
and XPOS are the corresponding functions to establish the current graphics cursor position.
Associated keywords: MOVE , PLOT, PLOTR, DRAW, DRAWR, TEST,
TESTR,XPOS,YPOS
NEW
NEW
NEW
COMMAND: Delete current program and variables. KEY definitions are not lost, and the display is
not cleared.