WEND
WEND
10 MODE 1:REM BASIC CLOCK TIME ROUTINE
20 INPUT "Enter the current hour, minute, and
second (h,m,s)"; hour,minute,second
30 CLS:datum = INT(TIME/300)
40 WHILE hour<13
50 WHILE minute<60
60 WHILE tick<60
70 tick=(INT(TIME/300)-datum)+second
80 LOCATE 70,4
90 PRINT #O,USING “## ";hour,minute,tick
100 WEND
110 tick=0
115 second=0
120 minute=minute+l
130 GOT0 30
140 WEND
150 minute=0
160 hour=hour+l
170 WEND
180 hour=1
190 GOT0 40
COMMAND: The WHILE/WEND loop repeatedly executes a body of program until a given condition
is true. The illustration here uses the WHILE/WEND loop to demonstrate the elegance of programs
constructed using this approach. The body of the features of a variety of different clocks can now be
added. The WEND command terminates the WHILE loop..
Associated keywords: WHILE
WHILE
WHILE <logical expression>
WHILE DAY<0
see example above
COMMAND: A WHILE loop repeatedly executes a body of program until a given condition is true.
The WHILE command defines the head of the loop, and gives the condition. The WEND command
terminates the WHILE loop.
Associated keywords: WEND
To Next Page
Loading...
