Settings Pages
10
Modero S Series Touch Panels - Configuration & Programming Manual
Settings Pages
Overview
Modero S Series touch panels do not have separate Setup and Protected Setup pages. All touch panel settings and functionality are
now controlled through one Settings page. The Connection & Networks and Conf iguration sections are accessible with the correct
password.
Accessing the Settings Page
To access the Settings page, press and hold the Sleep button on the touch panel for 3 seconds.
Alternately, some installation circumstances may require disabling Settings page access through the Sleep button. In this case, you
may access Settings pages during a bootup of the panel. As the panel boots up, watch for a series of indicator dots to appear on
the splash screen (FIG. 2). To access the Settings page, press the bottom right corner of the touchscreen within the first three
seconds of these dots appearing on the screen.
NOTE: For more information on disabling Settings page access through the Sleep button, please refer to the Admin
Configuration section on page 29.
Using the Settings Pages
When opened, the Settings pages appear in the center of the panel display. Please note that many of the pages may be longer than
they initially appear. To reach additional functions on a given page, the page itself may be scrolled up and down, much like a
smartphone display, to reveal those functions.
NOTE: The Settings pages use the subpage feature. Not all menu items on a Settings page are visible on screen at one time, and
scrolling up and down to see them may be necessary. In the case of long Settings pages, a scroll bar appears momentarily when a
new subpage viewer appears, and allows you to gauge current position and length of the page.
Many of the entries on Settings pages are read-only, or may be modified if information on the same or another Settings page is
changed. The current information on a page appears in blue under the main category title; press the arrow to the right in order to
open the category’s Settings page (FIG. 3). If the arrow is grey, then the Settings page associated with that category is currently
disabled (FIG. 4). This may be altered with changes in connectivity (connecting a USB stick to the touch panel, for instance) or
changes to other Settings pages.
FIG. 1
Location of the Sleep button on the MST-431
FIG. 2 Indicator dots on the Modero S Series splash screen
To Next Page
Loading...
Need help?
General
