AMYET S6 - Page 14

AMYET S6 E-BIKE
12
P03 is the rated voltage setting option, which can set the rated voltage range: 24V, 36V, 48V.
P02 is the metric/imperial unit setting option, where 0 represents kilometres and 1
represents miles. The default is kilometres. Press the buttons and at the same time
to enter the parameter change status, short press the or button to select parameters,
short press the button to save the parameter settings and return to the parameter
setting item selection interface;
3.Rated Voltage Setting
2.Metric Unit Setting
Figure 1 Backlight Brightness Setting Interface
Figure 2 Metric and Imperial Units Setting Screen
Figure 3 Rated Voltage Setting Screen
-
+
-
+