AMYET S6 - Assembly Instructions

AMYET S6 E-BIKE
4
!
HANDLEBAR FEATURES
1.Unpack the ebike
ASSEMBLY INSTRUCTIONS
Assembly and first adjustment of your ebike from AMYET requires special tools and skills.
We recommend that you have this done by a professional, reputable bike mechanic. Keep
this manual and any other documents that came with your AMYET.
WARNING: Incorrect assembly, maintenance, or use of your ebike can cause
component or performance failure, loss of control, serious injury, or death. Even if
you’re an experienced bike rider, you must read and understand the entire manual
and any documentation provided for subcomponents or accessories before riding. If
you are not sure you have the experience, skills, and/or tools to correctly perform all
assembly steps in the manual, have a local, professional, reputable bike mechanic
assemble your ebike.
Open the bike box and, with the help of another person capable of safely lifting a heavy
object, remove the ebike and place it upright on the back wheel and front fork protector
plate. Carefully remove the packaging material protecting the bike frame and components.
Keep the packaging materials in case you want to ship the bike later. Otherwise, recycle
these materials, especially cardboard and foam, wherever possible. Remove the small box
and carefully set out the contents. After receiving the goods, please check the parts in the
package first. Make sure all parts are complete.If anything is missing, please contact
AMYET. Email：support@amyet.com
SHIMANO 7-SPEED GEAR
HEADLIGHTS
DISPLAY CONTROL
SINGLE/DUAL MOTOR
ELECTRONIC HORN
TURNING SIGNAL
TWIST-GRIP THROTTLE