AMYET S6 E-BIKE
23
Summary: Battery recommended temperatures
Recommended operation (riding) range: -15°C to 40°C (5°F to 105°F)
Recommended charging range: 5°C to 25°C (41°F to 77°F)
Recommended short-term storage range: -10°C to 25°C (14°F to 77°F)
Recommended long-term storage range: 5°C to 25°C (40°F to 77°F)
The battery will automatically turn off to prevent damage when its internal temperature
reaches below -15°C (5°F) or above 55°C (131°F).
On any bike or ebike, certain parts need to be replaced periodically due to wear, and
sometimes parts become damaged for various reasons. Components of any electrical bike
are subject to higher wear compared to the components of bikes without power assis-
tance. This is because ebikes can travel at higher average speeds than regular bicycles and
generally weigh more. Higher wear is not a defect in the product and is not subject to
warranty. Typical components affected are the tyres, brake pads and rotors, forks, spokes,
wheels, and the battery.
If you need to replace a part on your ebike, visit AMYET. If you want something that isn’t
listed there, contact AMYET Product Support. Be extremely careful about using parts or
accessories that AMYET has not tested for safety and compatibility with your specific
product.
CAUTION: Long-term storage of your battery at temperatures above 35°C (95°F) or
below 5°C (40°F) can reduce battery performance and lifespan.
CAUTION: Don’t store your battery long-term at full charge, zero charge, or very little
charge. Storing your battery for long periods at full charge can cause range decline
over time. Storing your battery for long periods at very little or no charge can cause
permanent range decline or a non-functional battery.
SAFETY CHECK
6. When charging is complete, unplug the charger from the power (wall) outlet, and then
unplug it from the battery. Be sure to pull gently on the plugs, not on the cables them-
selves. NOTICE: The charger is designed to stop charging automatically when the battery is
full. Store the charger carefully, making sure its plug does not come in contact with liquids,
dirt, debris, or metal objects, which can damage the plug and interfere with future opera-
tion.
!
!
To Next Page
Loading...