AMYET S6 - Wet Conditions

AMYET S6 E-BIKE
28
Decrease riding speed to help you control the ebike in slippery conditions.
Brake earlier since it will take longer to slow down than in dry conditions.
Remember that road hazards are more difficult to see when wet, so proceed with
extra caution.
Take care to be more visible to others on the road, following the tips in “Low-visibility
conditions” above.
LOW-VISIBILITY CONDITIONS
WET CONDITIONS
WARNING: Riding at night or in other low-visibility conditions (dawn, dusk, fog, rain,
mist, snow, etc.) makes it harder to see and avoid hazards and makes it harder for
others to see and avoid you, which increases risk of accidents, serious injury, or
death. Wet, slippery surfaces will compound your risk of injury or death. Avoid these
conditions whenever possible. If you must ride in these conditions, following the
guidelines below can reduce risk.
Wear reflective and brightly coloured clothing.
Slow down.
Use familiar routes with street lighting if possible.
Ensure tyres wall, pedal, and other reflectors are installed and unobstructed.
Ensure headlight and taillight/brake light are functioning correctly and unobstructed.
Use them.
Your S6 is not meant for use in puddles, heavy rain, or streams. Never immerse or
submerge this product in water or liquid as the electrical system may be damaged.
WARNING: Riding in wet conditions means slippery hands, feet, and riding surfaces,
which greatly increases your risk of accidents, serious injury, or death. Low-visibility
conditions (night, dusk, dawn, fog, mist, rain, snow, etc.) will compound your risk of
injury or death. Avoid riding in such conditions. If you choose to ride in wet condi-
tions, you do so at your own risk. Follow the recommendations below to reduce that
risk.
!
!