Analog way QuickMatriX QMX150 - Page 33

33
7.2.4 Misc
7.2.4 Misc
DYNAMIC FIT: enable or disable the automac recognion of
black band for digital content. The size and the aspect rao of
the layer are automacally adapted.
FREEZE MODE: choose to freeze all inputs or only one input
when you use the freeze funcon.
PIP BACKGROUND COLOR: here you chose the automac color
of PIP background, black is the default color.
For Ref. , in the VIDEO OUT SETTING secon, you
have access to:
RECORDING: allow to congure the video output. Conguraon
shall be done in secon 7.2.9.
OUTPUT#1 and OUTPUT#2 PLUGS: auto congure the video
output as a copy of the output #1 and #2.
A short summary of each output sengs appears on the
main page. You can see the number of outputs, their
resoluon, rate and HDCP status.
Select an output to adjust by either clicking on it from
the column on the le, or clicking the conguraon cog
icon for that output.
Once the individual output setup page is opened, you
have access to:
 choose your rate generaon mode, internal
(free-running within the unit) or Framelock by choosing
an input as a reference input,
 choose the output resoluon format,
choose the signal ming standards, if the mode is
set to internal
 the status menu will show you the current
output status,
 click on this buon to apply the new format/rate,
 indicates the status of the aached monitor and conrms connecvity,
 you can choose the type of output synchronizaon on the analog plug, for example RGsB for sync on
green, or RGBHV for separate H and V sync wires,
- HDMI as DVI: select this box to force the output to DVI mode instead of the default HDMI autosense mode.
When in DVI mode, no embedded audio will be transmied,
Into the output secon, you will be able to manage your output resoluons, formats, sync types, test paerns,
etc. On the SETUP > OUTPUT TAB, the following screen will appear:
