Analog way QuickMatriX QMX150 - Page 38

38
7.2.7 Frame management
 acvate the grabber to grab the color you want to key. Move the cursor and click on the grab
buon to grab the color.
To save a frame click on this buon:
The next page opens.
From here you can capture from the main or from the Preview.
You can sll freeze the output before saving your frame.


Choose rst Program or Preview, click on FREEZE if you want to freeze your output. Then click on EXECUTE to
save your frame into the selected slot.

The conguraon of this secon is only available if the VIDEO OUT SETTING mode is set to “RECORDING” in
the Precong > MISC secon.
Into this secon, choose the output format of the video output.
You will nd the status of your output and the possibility to choose the test paern. In addion, you can
adjust: