- 14 -
" " logo showed in the upper column will disappear synchronously.
Please check the attached table 1 for detailed definition of error code
Error code display interface
6. User Settings
In the information interface, press and hold the "PLUS" and "MINUS" button at the same time to
enter the setting interface. Short press the "CONFIRM" button in the setting menu to enter the sub
option. In the final option menu, short press the "confirm" key to confirm the current option. After
selecting the "Return" option, press the "CONFIRM" key to return to the previous menu. Long press
the "CONFIRM" button in any setting menu to directly return to the main interface.
The setting interface is divided into four levels of sub options. For details of setting menu contents,
please refer to attached table 2:
6.1 Single trip distance clearance
Short press the "MINUS" or "PLUS" button to switch to the "Reset trip" option. Select the "Yes" option,
and then short press the "CONFIRM" button to clear the relevant data of single trip.
Short press "CONFIRM" button on the "Return" option to return to the previous interface. Long press
"CONFIRM" button to return to the main interface.
The default value is "No".
To Next Page
Loading...
Need help?
General
