- 18 -
press "CONFIRM" button to return to the main interface.
Default setting is shows all the options.
Customized data showing setting interface
6.8 Wireless setting
Short press the "MINUS" or "PLUS" button to select the wireless setting to check the status or name
of the wireless.
In the wireless status option, select the "Enable" option, and then short press the "CONFIRM" button
to set the wireless function. Select the "Disable" option, and then press the "CONFIRM" button to
disable the wireless function.
After the state changes, the display needs to be restarted to take effect.
Short press the "CONFIRM" button on the "Return" option, to return to the previous interface. Long
press "CONFIRM" button to return to the main interface.
Default setting is “Enable”. The wireless name is a read-only value and cannot be modified by the
customer.
Wireless setting interface
To Next Page
Loading...
Need help?
General
