Ancar SD300 - Cannula Support

USER MANUAL DENTAL UNIT - QS4-451-01 / SD 300 Scandinavian
16
8.6.- Cannula support (surgical suction, instruments, keypad)
The tube support is mounted on an arm with a large capacity of movement to find the desided
position. (Fig. 10)
The surgical suction motor is activated by lifting any of the cannulas. Cannulas (A) can be
sterilised, and are autoclave-safe; also the cannula-holder (B), with the proviso and precaution
for the internal rubber. If not fitted with a continuous suction system, the separator system
should be left for a short emptying period.
SURGICAL SUCTION
Depending on the type of amalgam separator installed (Cattani, Metasys, Dürr), all manufacturers
recommend their own products and methods for disinfecting cannulas, attached to this manual.
The cannula and cannula-mount sterilizationsterilisation process is the same for all systems.
It is recommended to use foamless disinfecting tablets, which can be left to work overnight.
Furthermore, the outer tubes and tongues should be lubricated every 15 days with Lubri-Jet
products, drying off any excess water.
3F SYRINGE (OPTIONAL)
EThe second instrument on the cannula support is the 3F syringe, with 3 functions: air, water
and spray. This instrument works independently from the control pedal..
For more information, see the corresponding appendix.
&
%
$
Fig. 10