USER MANUAL DENTAL UNIT - QS4-451-01 / SD 300 Scandinavian
25
APPENDIX 3. CLEANING AND DISINFECTING OTHER
PARTS OF THE UNIT. OTHER SAFETY PRECAUTIONS:
UNIT, LAMP, ELECTRIC
Cleaning and disinfecting
Always disconnect the unit from the mains before carrying out any procedures.
Do not wet or flood the unit with water.
Do not use domestic detergents or disinfecting foams.
Cleaning upholstered areas
Clean periodically with a soapy solution.
Cleaning polyurethane areas (unit base cover, upholstery support, lifting mechanism
covers)
Polyurethane areas must be cleaned using a cloth soaked in soapy water.
It is recommended to avoid using concentrates, detergents and strong abrasives to remove
difficult stains.
Clean regularly.
Cleaning and disinfecting exterior metal parts (excluding instruments)
Use any product with an antimicrobial, fungicidal, sporicidal or virucidal action that is compatible
with the medical industry.
Cleaning and Disinfecting the Column Arm and Light
Spray disinfectant. To not spray on hot surfaces.
To disinfect the dental light, wait for the head to cool.
Regularly disinfect these parts using a disinfectant with at least an antimicrobial and fungicidal
action.
To clean the light, head and handles, use a damp cloth. Clean reflective surfaces using a dry
cloth.
Check manufacturer instructions.
Cleaning and Disinfecting the Basin / Spittoon
Use disinfectants recommended by Cattani or Metasys. See appendices I and II.
Cleaning and disinfecting the water unit
Regular cleaning and disinfecting: use antimicrobial, fungicidal, virucidal and sporicidal
disinfectant.
Cleaning and disinfecting the instrument tray, auxiliary tray and hoses
Cleaning and disinfecting: clean after each treatment using antimicrobial, fungicidal, virucidal
and sporicidal disinfectant.
To Next Page
Loading...