AND TALKING PREMIUM+ - About Memory; Accessing Stored Measurements

E-21
About Memory
Note: This device stores the last 90 measurements in memory. The device announces the memory
data values as they are displayed.
1. Press the or button. The average of
all measurements and the number of data
are displayed. (If no data, “0” is displayed.
Press the , or START button to turn
the device off.)
2. Each time the button (or the button
to display the data in the reverse order) is
pressed, the memory data is displayed as
follows.
Average of all AM (morning)
measurements taken between 4:00 and
9:59. (In the example, 10 measurements.
If no data, “--” is displayed.)
Average of all PM (evening)
measurements taken between 18:00 and
1:59. (In the example, 9 measurements. If
no data, “--” is displayed.)
Most recent data (See No. 35). Three
seconds after the data number display,
the measurement data is displayed.
Last data (No.1). Three seconds after the data number display, the
measurement data is displayed.
3. After the last data is displayed, press the
button to return the average
display of all measurements.
4. Press the START button to turn the device off. After one minute of
non-operation, the device will turn off automatically.
Average of
all the data
Average systolic
Average diastolic
Average pulse
Press or
Most recent data
Systolic
Diastolic
Pulse
Last data (Oldest)
Average
of AM data
Average
of PM data
Average systolic
Average diastolic
Average pulse
Average systolic
Average diastolic
Average pulse
Systolic
Diastolic
Pulse