Unknown status is shown when an internal error has occurred within the GSM module, or a
communication error has occurred on the network. Power-cycling the BundGuard and therefore re-
attempting connection is recommended in this instance. In the case that this error occurs frequently,
the operator should be informed of the issue.
Roaming indicates that access to your network is being provided by a 3
rd
party network. Connection to a
home network is always attempted initially with the GSM module but roaming will occur when access to
a network is provided automatically by partnering operators.
4.1.11.2 Operator name
This page of the menu indicates the operator name that the GSM module is connected to. It is provided
for reference and can change if the GSM module were to be reset or lose connection. The operator can
attempt to change this operator name by power-cycling the GSM module and thereby invocating
another network initialisation sequence.
5.Technical Specification
To Previous Page
Loading...