EasyManua.ls Logo

ANDI AXC1200FWT - Clearance Dimensions; Locating the Range; Installation Drawings

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
NOTE: This appliance shall be installed only by authorised personnel and in
accordance with the manufacturer’s installation instructions, local gas fitting
regulations, municipal building codes, electrical wiring regulations, AS
5601/AG601 – Gas Installations and any other statutory regulations.
CLEARANCE DIMENSIONS
Range may be installed with zero clearance adjacent to (against)
combustible construction at the rear and on the sides below the cooktop. For
complete information in regard to the installation of wall cabinets above the
range and clearances to combustible wall above the cooking top refer,
AS 5601/AG601 – Gas Installations and any other statutory regulations.
Do not install the range in any combustible cabinetry which is not in accord
with these installation instructions.
CAUTION: SOME CABINETS AND BUILDING MATERIALS ARE NOT
DESIGNED TO WITHSTAND THE HEAT PRODUCED BY THE NORMAL
SAFE OPERATION OF A LISTED APPLIANCE. DISCOLORATION OR
DAMAGE, SUCH AS DELAMINATION, MAY OCCUR.
LOCATING THE RANGE