7
Setting:
Select a function by pressing the function button and set the required time
with +/- buttons.
+/- Buttons:
Pressing the “+” button increases the time set, pressing “-“ decreases it. The
count-up or count-down speed increases the longer the button is held in the
appropriate position.
Setting Time of Day:
Select Time of day function by keeping the duration and end time buttons
pressed together while setting time of day with +/- buttons. Any programme
which has been set is cancelled and the outputs switched on.
Manual Operation:
Press duration and end time button together. The relay contacts will switch
on. The “A” symbol will be erased, the pot symbol illuminated. Any
programme which has been set is cancelled.
Semi-Automatic Operation with cooking duration:
Select cooking duration function and set required end time with the +/- button.
The “A” and cookpot symbols appear. The relay output becomes active. If
time of day = cooking end time the relay output and the cookpot symbol are
switched off. The audible signal sounds and “A” blinks.
Fully Automatic Operation:
Select cooking duration function and set required duration with the +/- button.
The “A” symbol appears. The relay is switched on and the cookpot symbol
appears. Select cooking end time function and the earliest possible end time
is displayed. Set the required end time with the +/- button. The relay and the
cookpot symbol are switched off. The cookpot symbol appears again when
time of day = the calculated start time.
After the automatic programme has ended, the symbol “A” blinks. The audible
signal is heard and the cookpot symbol and the relay are switched off.
Minute Minder:
Select minute minder button and set required time with +/- button. As the time
set elapses the bell symbol is displayed. After the time set has elapsed, the
audible signal sounds.
To Next Page
Loading...