EasyManua.ls Logo

ANDI AXC1200FWT - Additional Installation Requirements; Ventilation; Model Number Plate

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
Additional Installation Requirements
Do not set range over holes in the floor or other locations where it may be subject to strong
drafts. Any opening in the wall behind the range and in the floor under the range should be
sealed. Make sure the flow of combustion or ventilation air is not obstructed.
A range should not be installed over kitchen carpeting.
VENTILATION
Ventilation must be in accordance with AS5601/AG 601 – Gas Installations. The appliance
must be install in a well-ventilated environment to guarantee a correct combustion gases
exchange, proper air circulation and working temperature within safety limits.
MODEL NUMBER PLATE
The Model Number Plate is located on the underneath case. A second Model Number
Plate is applied on the front page of the instruction booklet.
Check the model number plate to ensure that the appliance is suitable for the available
gas supply.