8
Audible Signal:
The audible signal (1 Hz interval) sounds at the end of a minute minder cycle
or of a cooking programme for a period of 7 minutes. The signal can be
cancelled by pressing any function button.
Pressing the “-“ button without having previously selected a function the
frequency of the signal changes. A selection from 3 possibilities can be made.
The selected signal is audible as long as the “-“ button is pressed.
Programme Start and Verification:
A programme which has been set is carried out after setting the time
required. The “time-to-turn” can be verified at any time by selecting the
appropriate function.
Setting Error Identification:
The setting is incorrect if time of day is in between the calculated cooking
start and end times. If an error has been made, this will be indicated by the
audible signal and by the symbol “A” flashing. The faulty setting can be
corrected by changing one or both functions.
Cancelling a Programme:
A programme can be cancelled by selecting the manual function. After a
programme which has been set comes to an end, it is automatically
cancelled.
MANUAL TIMER
MANUAL MODE: Turn knob left, counterclockwise, up to Hand symbol.
ATTENTION, if knob is left on manual mode the oven will stay on
continuously.
PROGRAMMED COOKING MODE: Turn knob right, clockwise, and select
desired cooking time. At end of cooking time, oven will be automatically turn
off and a beep signal will be heard. Then, to stop the beeping signal just push
timer knob.
SELECTOR SWITCH
This control allows you to choose the desired Oven function mode. The
following illustration give an overview of what happens in the oven with each
mode setting. It also explains which elements heat up for each specific mode.
The lower and circular elements are concealed under the floor and behind
back wall of the oven respectively. The elements will turn on and off to
maintain the oven temperature.
To Next Page
Loading...