Andrew James Dual Blade Bread Maker - Electrical Information; Appliance Connection; Extension Cable Use

24
shipped back to the customer.
If you wish to return your item for a full
refund, you have the right to do so within
the rst 7 days. For our returns policy
please go to:
www.andrewjamesworldwide.com
Customers are responsible for any taxes
applied to our products when they are
shipped outside of the EU.
Electrical Informaon
Always ensure the voltage on the rang
label corresponds to the power supply
where the product is being used.
WARNING! This product must be connect-
ed to an earthed electrical power supply.
The green/yellow conductor in the supply
cord must be connected to the Earth ter-
minal in the plug. The power supply must
have an Earth connecon.
Precauons should be followed for safe
cable management and connecon to the
power supply
If a new mains plug needs to be ed fol-
low the ng instrucons supplied with
good quality BS1363A plugs. If in doubt
consult a qualied electrician or appliance
repair agent.
Recommended fuse: 13A
If an extension cable is required, it must
have an earth conductor. To avoid over-
heang the extension cable should be
rated no less than 13A and be fully un-
wound before use.
Do not aempt to modify electrical plugs
or sockets or aempt to make an alterna-
ve connecon to the electrical supply.
Disposal of the appliance
Waste Electrical & Electronic Equipment
(WEEE) Waste & Recycling
Disposal of Electrical and Electronic
Waste
Non-household waste. This product must
not be disposed of together with ordinary
household waste.
Separate collecon of used products,
baeries and packaging allows the recov-
ery and recycling of materials. Re-use of
materials helps prevent environ-mental
polluon and reduces the demand for
raw materials.
Local authories, retailers and collecon
organisaons may provide for separate
collecon of elec-trical products, baer-
ies and packaging.
 Safely dispose of the old plug.
 Connect the brown lead to the live ter-
minal “L” in the new plug.
 Connect the blue lead to the neutral
“N” terminal.
 Connect the green/yellow lead to the
earth “E” terminal.