Modular Power Meter
Modular power meter version 1.0 Page 37 / 40
7. ModbusLink
ModbusLink is a PC program that can be used to control the sensors. A USB-RS485 cable is
required to connect to the sensors. The program has a user interface at the top and an
information window below. This includes an option to show all modbus communication.
There are 3 main functions:
- Read registers: Either read a selected number of registers starting at a selected
address or use a command file to initiate multiple read operations.
- Upgrade: Upgrade a single sensor from a selected upgrade file.
- Config: Configure a single sensor from a selected configuration file.
To Next Page
Loading...