What to do if the Angelcare Baby Monitor Nursery unit power indicator doesn't light up?
If the Nursery unit power on indicator (green light) on your Angelcare Baby Monitor does not light up, check the connections or try changing to another electrical outlet.
How to improve Angelcare AC1120 performance with battery replacement?
If you suspect that inadequate battery power is affecting the performance of your Angelcare Baby Monitor, please replace the batteries.
Why is there no sound coming from my Angelcare AC1120?
If no sound is being transmitted on your Angelcare Baby Monitor, first ensure that both the Nursery and Parent units are powered on and plugged into functioning electrical outlets. Check the batteries in both units, replacing or recharging them if needed. Also, verify that the monitor is not on 'MUTE' on the top bar of the Parent unit; it should be set to 'ON'.
What to do if my Angelcare AC1120 Baby Monitor has weak reception?
If you are experiencing weak reception with your Angelcare Baby Monitor, try these steps: First, bring the units closer together. If that doesn't work, change the position of one or both units. Ensure the units are placed on a flat surface, away from the baby's reach. Finally, replace the batteries or recharge the Parent unit to ensure adequate power.
General| Interface | RF |
|---|---|
| Frequency band | 2.4 GHz |
| Maximum range | 200 m |
| Channels quantity | 64 channels |
| Smartphone support | - |
| Temperature sensor | Yes |
| Product color | Grey, White |
| Accessories included | Batteries |
| Power source type | AC, Battery |
| Battery technology | Nickel-Metal Hydride (NiMH) |
| Number of batteries supported | 3 |
To Next Page
