English
The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
data.
B)Burn hazard: watch out for hot surfaces.
C)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
D)General hazard: read the manual carefully be-
fore carrying out any procedure.
E)General hazard: all relevant regulations must be
complied with. "Install in compliance with the rele-
vant regulations and use in well ventilated premises
only".
F)General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of
failure to comply with the installation and com-
missioning instructions".
G)CE marking: this indicates that the equipment is
compliant with all relevant laws applicable to the
product..
H)General hazard: use only ceramic heating
stones supplied by the manufacturer.
SAFETY AND INFORMATION SIGNS
The appliance is delivered complete with the follow-
ing:
A)Cooking plate (36A5530)
B)Grid clearance reduction (36A5540)
C)Pack of ceramic bricks (37T1320)
D)Brush (36X0040)
The appliance can be equipped with the following
accessories on request (“see general catalogue”).
STANDARD ACCESSORIES
OPTIONAL ACCESSORIES
E
F
B
DC
G
A H
A B
D C
To Next Page
Loading...
Need help?
General
