Page 10 of 24
5.2 Assembling the Extension Tube
Insert the end of the Extension Tube into the mating hole ensuring the locking
tab is aligned, then push inward until it locks into place.
5.3 Removing the Extension Tube
To remove the Extension Tube, grasp the Tube, press the locking tab down
to release then pull the hose straight out.
5.4 Attaching the Motorised Floor Head
To attach the motorised floor head to the other end of the extension tube,
insert the end of the Extension Tube into the end of the
Floor Head, ensuring
the locking tab is aligned, then push inward until it locks into place.
To Next Page
