anko ST01 User Manual

10
2. Pull out the dust cup filter assembly (No. 15), then twist the HEPA filter frame counter-
clockwise to take out HEPA filter as direction (No.16). (See Fig. 10)
Fig. 10
3. Empty the dust from the dust cup container.
4. Rinse the dust cup filter in cold water, and then let it air dry for 24 hours before placing
it back in the dust cup container.
Important Notes: DO NOT use in a washing machine to clean the dust cup filter.
DO NOT use a hair dryer to dry it.
AIR DRY ONLY.
5. Place the dust cup filter carefully into the dust cup compartment.
To avoid damage to the product NEVER operate the vacuum cleaner without the dust
cup filter in place.
6. Attach the dust cup container to the main body of the unit.
Note: It is recommended that the dust cup filter be cleaned every week (depending
on usage) to ensure peak performance of the unit.
15
16

anko ST01 Specifications

General

Brand	anko
Model	ST01
Category	Vacuum Cleaner
Language	English