Anolis ArcPower 384 - Page 11

11
Menu Level 1 Menu Level 2 Menu Level 3 Menu Level 4 Menu Level 5 Menu Level 6
Ch. 5 Dimmer
Set Active
Communication protocol
DMX
DYNET
RS-232
Display Adjusting Display Permanent
On
On, O󰀨
Display Intensity 1..6..10
Display Backlight 1..5...10
Display Turned On, O󰀨
IR Sensor On, O󰀨
Init E󰀨ect Positions Red LEDs 1 0-255
:
Dimmer 0-255
Save
Temperature Unit °C, °F
White Balance On, O󰀨
White Balance
Setting
Red 0..200..255
Green 0..........255
Blue 0..237..255
LEDs Output Current
Zone 1 350mA
: 700mA
Zone 8
LEDs Power Limiting
Zone 1 On, O󰀨
:
Zone 8
Maximum Fade Time
0.1..2..25.5
Default Setting
Test Sequences Test program......
Manual Mode
Preset E󰀨ect Control
RED LEDs 1 Intensity 1-10
:
Dimmer
Manual E󰀨ect Control
Pan 0-255
:
Dimmer 0-255
Stand-alone Setting
Preset Playback Disabled
Test program
Program 1
:
Program 3
Playing Program
Test Program in Loop
Program 1 in Loop
:
Program 3 in Loop
Editing Program Program 1 Edit Steps Step 1 Red LEDs 1 (0-255)
: : :
Program 3 Step 99
Dimmer (0-255)
Fade T.(0.1-25.5s)