Anolis ArcPower 384 - Technical Specifications

22
11.Technical Specications:
Power supply
Input voltage: 100-240V AC, 50/60 Hz
Max. power consumption at 230V: 520 W/540VA (350mA LED outputs), power factor = 0.96
1200W/1250VA (700 mA LED outputs) , power factor = 0.96
Main fuse: T 8A H @230V, T 12A @120V
Output
Max.Output current:350mA or 700 mA per colour
Number of LED zones: 8
Max. load per zone (1W LEDs or ProLight Opto 3Watt Proeon LEDs) :
36 LEDs in RGB mode
48 LEDs in RGBW mode
1 x ArcPad 48
Total load (1W LEDs or ProLight Opto 3Watt Proeon LEDs):
288 LED´s in RGB mode
384 LEDs in RGBW mode
8 x ArcPad
Maximum total cable length between one LED zone output and connected LED module
1W LEDs: 80 metres
ProLight Opto 3Watt Proeon LEDs: 20 metres
ArcPad 48: 40 metres (connecting cable Igus with Chogori-Cogori connectors has to be used)
DMX control channels
Mode 1: 24 channels
Mode 2: 32 channels
Mode 3: 35 channels
Mode 4: 4 channels
Mode 5: 5 channels
Mode 6: 51 channels
Terminals
LEDs: RJ45
DMX data in/out: Locking 3-pin and 5-pin XLR
DyNet: RJ45
Ethernet: RJ45
RS232: DE-9 (male)
AC power input: Neutrik PowerCon, A-type, NAC3MPA
Control & Programming
Setting and addressing: ANS (Anolis navigation system)
Display: blue/white LCD graphic
Control options: DMX, Art-Net
Stand alone operation
3-editable programs up to 99 steps each
White colour balance adjusting
Manual control of all DMX channels via control panel
Operating temperature range
0°C/+40°C
Max. surface temperature
70°C