MS2720T PM PN: 10580-00341 Rev. C 1-1
Chapter 1 — General Information
1-1 About this Manual
This SCPI Programming Manual provides information for remote operation of the MS2720T
High Performance Handheld Spectrum Analyzer using commands sent from an external
controller via Ethernet or USB connection. This Programming Manual includes the following:
• An overview of Ethernet and USB connection to the instrument.
• An overview of Standard Commands for Programmable Instruments (SCPI) command
structure and conventions.
• The IEEE common commands that are supported by the MS2720T.
• A complete listing and description of all the SCPI commands that can be used to
remotely control functions of the Spectrum Master. The commands are organized by
instrument mode starting in Chapter 3, “All Mode Commands”.
This manual is intended to be used in conjunction with the MS2720T User Guide,
P/N: 10580-00340. Refer to that manual for general information about the MS2720T,
including equipment setup and operating instructions.
1-2 Introduction
This chapter provides a general description of remote programming setup and interface
connections using Ethernet or USB, and sending SCPI commands to the instrument.
1-3 Contacting Anritsu
To contact Anritsu, please visit:
http://www.anritsu.com/contact.asp
From here, you can select the latest sales, select service and support contact information in
your country or region, provide online feedback, complete a “Talk to Anritsu” form to have
your questions answered, or obtain other services offered by Anritsu.
Updated product information can be found on the Anritsu website:
http://www.anritsu.com/
Search for the product model number. The latest documentation is on the product page under
the Library tab.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
