Anritsu Spectrum Master MS2720T - WCDMA Parameter Names

Chapter 2 — Programming with SCPI 2-7 Parameter Names
MS2720T PM PN: 10580-00341 Rev. C 2-23
WCDMA Parameter Names
Table 2-11. Available Parameters in WCDMA Mode (1 of 2)
Parameter Name Description
SN Instrument serial #
UNIT_NAME Instrument name
TYPE The data type (Setup or Data)
DESCR Trace name
DATE Trace date/time
BASE_VER Base FW version
APP_NAME Application name
APP_VER Application FW version
APP_MODE Application Mode
CENTER_FREQ Center frequency
AUTO_SCRAMBLING_CODE Auto scrambling code detection on/off
SCRAMBLING_CODE Selected manual scrambling code
MAX_SPREADING_FACTOR Maximum spreading factor
REFERENCE_LEVEL Reference Level
THRESHOLD Active channel threshold
CURRENT_MEASUREMENTS Currently active measurements
SCALE Display scale (dB/division)
POWER_OFFSET Applied power offset
SCCPCH_CODE Selected S-CCPCH channelization code
PICH_CODE Selected PICH channelization code
CURRENT_VIEW Current view
CDP_ZOOM Zoom range for code domain power
CDP_ZOOM_START Start code for zoom window
REFERENCE_FREQUENCY Reference Frequency
SCCPCH_SPREAD_FCT Selected S-CCPCH spreading factor
RUN_HOLD Run/hold state
EXT_REF_FREQ Selected external reference frequency
DYNAMIC_ATTENUATION Dynamic range on/off
ACLR_DISPLAY_GRAPH Display ACLR trace on/off
MARKER_TABLE Marker table on/off
OTA_AUTO_SC OTA auto scrambling code on/off
OTA_CODE_LOCK OTA code lock on/off
OTA_DISPLAY_VALUE Selected OTA display value
OTA_SORT_PARAM Selected OTA sort parameter
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com