7-2 :CALCulate Subsystem Chapter 7 — EV-DO Commands
7-2 PN: 10580-00341 Rev. C MS2720T PM
7-2 :CALCulate Subsystem
The commands in this subsystem process data that has been collected via the CALCulate
subsystem. Valid measurements with the use of markers are RF Measurement - Channel
Spectrum and the Demodulator Measurement - CDP MAC.
:CALCulate:MARKer:AOFF
Title: Turn All Markers Off
Description: Turns off all markers.
Front Panel
Access: Marker, All Markers Off
:CALCulate:MARKer{1|2|3|4|5|6}:Y?
Title: Marker Read Y Value
Description: Reads the current Y value for the specified marker. The units are the
units of the y-axis.
Default Unit: Current y-axis unit
:CALCulate:MARKer{1|2|3|4|5|6}[:STATe] OFF|ON|0|1
:CALCulate:MARKer{1|2|3|4|5|6}[:STATe]?
Title: Marker State
Description: Sets the specified marker on/off.
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: OFF
Example: To turn off reference marker #1:
:CALCulate:MARKer1:STATe OFF
Front Panel
Access: Marker, On/Off
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
