Chapter 14 — TD-LTE Commands 14-5 :FETCh Subsystem
MS2720T PM PN: 10580-00341 Rev. C 14-11
:FETCh:OTA:TXTEst?
Title: Fetch OTA Tx Test
Description: Returns the most recent OTA Tx Test measurement results. Data is
returned as 2 comma-delimited values: Channel Power in dBm and
Occupied bandwidth measurement in MHz. “--” is returned for each
data that is not valid at that instance.
Data is returned as 3 sets of comma-delimited values. Each set as
follows: Cell ID, Group ID, Sector ID, S-SS Power, RSRP, RSRQ, and
SINR
Following the six sets of data is and addition set of four numbers:
Dominance, Antenna count, Average Power, Delta Power.
“--” is returned for each data that is not valid at that instance.
Front Panel
Access: Measurements, RF, Channel Spectrum
:FETCh:OTA:MAPping?
Title: Fetch OTA Coverage Mapping
Description: Returns the most recent Coverage Mapping measurement results. Data
is returned as 2 comma-delimited values: Channel Power in dBm and
Occupied bandwidth measurement in MHz. “--” is returned for each
data that is not valid at that instance.
Data is returned as 6 sets of comma-delimited values. Each set as
follows: Cell ID, Group ID, Sector ID, S-SS Power, RSRP, RSRQ, and
SINR.
Following the six sets of data is a final value for the Dominance.
“--” is returned for each data that is not valid at that instance.
Front Panel
Access: Measurements, Over-the-Air, Mapping
:FETCh:RF:ACLR?
Title: Fetch Adjacent Channel Leakage Ratio
Description: Returns the most recent adjacent channel leakage ratio measurement
results. If the instrument is sweeping, it will not return until the sweep
is complete. Refer to “:READ:RF:ACLR?” on page 14-22 for a description
of the returned data.
Default Unit: dBm
Front Panel
Access: Measurements, RF, ACLR
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
