Anritsu Spectrum Master MS2720T - Page 77

Chapter 4 — Spectrum Analyzer Commands 4-2 :CALCulate Subsystem
MS2720T PM PN: 10580-00341 Rev. C 4-19
:CALCulate:MARKer{1|2|3|4|5|6}:DELTa[:STATe] OFF|ON|0|1
:CALCulate:MARKer{1|2|3|4|5|6}:DELTa[:STATe]?
Title: Delta Marker State
Description: Sets the specified delta marker on or off.
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: OFF
Example: To turn on delta marker #3:
:CALCulate:MARKer3:DELTa ON
:CALCulate:MARKer3:DELTa 1
:CALCulate:MARKer3:DELTa:STATe ON
:CALCulate:MARKer3:DELTa:STATe 1
To turn off delta marker #6
:CALCulate:MARKer6:DELTa OFF
:CALCulate:MARKer6:DELTa:STATe OFF
:CALCulate:MARKer6:DELTa:STATe 0
Front Panel
Access: Marker, Delta
:CALCulate:MARKer{1|2|3|4|5|6}:FCOunt[:STATe] OFF|ON|0|1
:CALCulate:MARKer{1|2|3|4|5|6}:FCOunt[:STATe]?
Title: Marker Counter
Description: Turns the marker frequency counter on or off. The marker counter is
turned off when the selected marker is turned off. If delta marker is on
when setting marker counter to on, then delta marker is turned off. If
noise marker is set to on when setting marker counter to on, then noise
marker is set to off. This command is not valid in zero span.
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: OFF
Example: To turn on frequency counter for reference marker # 2:
:CALCulate:MARKer2:FCOunt ON
:CALCulate:MARKer2:FCOunt 1
Front Panel
Access: Marker, More, Counter Marker
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com