Anton Paar SmartRef - Installation and Use Guidelines; General Use and Safety Warnings; Explosion Risk Operation Warning; Personal Safety Precautions

5
Anton Paar warrants the proper functioning of the device only if no modications are made to mechanics, electronics, or
device software.
Use the device only for the purpose described in the instruction manual. Anton Paar is not liable for damages caused by
incorrect use of the device.
The results delivered by the device depend not only on the correct functioning of the device, but also on various other factors.
Do not base any decisions concerning safety or commercial issues on data measured by a SmartRef.
INSTALLATION AND USE
WARNING!
Do not use the device in medical areas.
Use the device as a stand-alone unit (the SmartRef cannot be operated without a smartphone or tablet). Do not combine the
device with other instruments or devices for automation purposes!
Use only accessories and consumables supplied or approved by Anton Paar.
Ensure that all operators are familiar with the safety instructions for the device.
Keep the device away from children.
Ensure that the device is sufciently supervised during operation.
WARNING!
In case of damage or malfunction, do not continue operating the device. Do not operate the device under conditions which
could result in damage to goods or injuries or loss of life.
Do not expose the device to temperatures below 0 °C (32 °F) if the sample well contains water. Freezing water can cause
damage to the sample well.
OPERATION IN AREAS WITH RISK OF EXPLOSION
WARNING!
The device is not explosion-proof and therefore must not be operated in areas with risk of explosion.
PERSONAL SAFETY
WARNING!
Always keep a distance of at least 15 cm (6 in) between the device and an implanted cardiac pacemaker or debrillator.