6
CAUTION!
During operation of the device, the operator must be equipped with appropriate personal protective equipment (safety
goggles, gloves).
GENERAL PRECAUTIONS
Observe and adhere to your national safety regulations regarding the handling of all substances associated with your
measurements (e.g. use safety goggles, gloves, respiratory protection, etc.).
For the handling of substances, abide by the corresponding material safety data sheets.
WARNING!
Fill only substances which will not pose a risk if they leak from the device in case of damage or malfunction.
WARNING!
Before a measurement, check the wetted parts of the device for chemical resistance to the samples and cleaning agents
used.
Fill only liquids which will not attack the wetted parts of the device.
WARNING!
Take care that the liquids (samples and cleaning agents) that you use are chemically compatible when they come into contact
with each other. They must not react exothermally or produce harmful substances.
Take measures that spilled liquids cannot get into plug connections or venting slots of electrical appliances.
Do not leave the device in a location exposed to direct sunlight or near a heat source for any extended period of time.
Do not change the ambient temperature of the device abruptly.
CAUTION!
Be careful with hot samples. Handling samples with temperatures of more than 50 °C (122 °F) bears the risk of burns.
Observe the maximum sample temperature.
CAUTION!
Do not drop the device and protect it against strong impacts as this may lead to a malfunction.
To Next Page
Loading...
