EasyManua.ls Logo

Anton Paar SmartRef - Flammable Samples and Battery Handling; Flammable Material Safety Guidelines; Battery Handling and Safety; Approved Battery Types

Anton Paar SmartRef
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
PRECAUTIONS FOR FLAMMABLE SAMPLES AND CLEANING AGENTS
CAUTION!
Keep potential sources of ignition, like sparks or open ames, at a safe distance from the device.
Store only the minimum required amount of sample, cleaning agents, and other ammable materials near the device.
Do not spill sample/cleaning agents or leave their containers uncovered. Immediately remove spilled sample/cleaning agents.
Ensure that the setup location is sufciently ventilated. The environment of the device must be kept free from ammable gases
and vapors.
Provide re-extinguishing equipment.
BATTERY HANDLING
Make sure you insert the batteries with the correct polarity.
Keep batteries away from children.
Do not leave batteries lying around unattended. They can be dangerous for children or pets if they use them as toys.
If a battery has been swallowed, seek medical advice immediately.
Leaking or damaged batteries can cause burns if they come into contact with skin. Use gloves for their handling.
Never short-circuit or open batteries.
Do not expose batteries to heat or throw them into re.
Do not charge non-rechargeable batteries. There is a risk of explosion.
WARNING!
Do not insert damaged batteries in the battery compartment. They can cause permanent damage to the device and re.
WARNING!
Do not use lithium ion rechargeable batteries or lithium ion batteries with the device.
Use only batteries type AAA LR03 (alkaline) or rechargeable batteries type AAA HR03 (NiMH).
Do not replace the batteries in an environment with high humidity. Vapor could be trapped inside the unit, which could cause
condensation, permanently damaging your device.

Related product manuals