EasyManua.ls Logo

AnyTone 929 - Emergent Charging

AnyTone 929
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
05
BATTERY INFORMATION
Plug the Li-ion battery or the transceiver installed with Li-ion 2.
battery into the matched charger.
A. Make sure that the battery is well connected with charging
connectors.
Charging indicator---Red
Fully charged. Charging indicator--Green.3.
Note:
It takes approximately 4 hours to fully charge the battery.
But, the actual charging time depends on the dump battery.
After fully charged, please remember to remove the battery
or transceiver out of charger. Over charging will shorten the
battery life and reduce its performance.
Emergent Charging
Connect the transceiver directly with adaptor
or car charger to charge.
Note:
Please power off the transceiver before
charging the transceiver in this way. Also, it
takes longer time (totally 12hours) to fully
charge the transceiver in this way.
Working Indicator
Charging Indicator
Transceiver Charge
Battery Charge

Table of Contents

Related product manuals