19
FUNCTIONS SETUP
OFF: turn off FM radio function (reset the transceiver
when FM radio is on can also turn this function off)
Press [PF1] or [PF2] to exit.3.
NOTE:
When FM radio function is on, press
/
to search FM
radio station and announce current channel number. When
a certain radio station is detected, the radio will rest on the
station. The radio can transmit or receive when FM radio is
on.
Beep Voice Prompt
Press 1. repeatedly till "BEP" on the LCD twinkles.
Press 2.
/ to on/off the BEEP voice prompt
function.
ON: turn on the BEEP voice prompt.
OFF: turn off the BEEP voice prompt.
Press [PF2] or [PF2] to exit.3.
Squelch Level Setup
This function is used to setup the receiving signal intensity. If the
receiving signal intensity reaches a certain level, you can hear the
other party calling, otherwise transceiver will remain mute.
Press 1.
repeatedly till "SQ" on the LCD twinkles.
Press 2.
/ to select desired squelch level.
Totally 10 levels for option: OFF, 1-9 grade
Press [PF1] or [PF2] to exit.3.
NOTE:
To manually set this function, users need to enable this
function via programming software firstly.
To Next Page
Loading...
